Renogy 12V 40A DC-DC Battery Charger
The Renogy 12V 40A DC-DC Battery Charger charges a 12V auxiliary (house) battery from the starter battery of your RV or vehicle, at up to 40A and up to 94% charging efficiency. It works with traditional and smart alternators and supports AGM/SLD, gel, flooded and lithium iron phosphate batteries plus a user mode. It weighs up to 4.4 lbs (2 kg).
Up to 40A of Charge Current Between 12V Batteries
The Renogy 12V 40A DC-DC Battery Charger is a buck-boost charger for 12V-to-12V systems. Its maximum rated charge current is 40A, with a maximum input power of 600W at 40A. Input and output voltage both range from 9V to 16V, and the charger draws less than 15mA when there is no load.
Works With Traditional and Smart Alternators
With a traditional alternator, the Renogy 12V 40A DC-DC Battery Charger starts charging when the starter battery reaches 13.2V for 15 seconds and stops when it falls to 12.7V. With a smart alternator, the IGN signal wire must be connected: charging starts at 12V for 15 seconds and stops at 11.5V. Alternator running detection monitors the alternator to avoid over-discharging the starter battery.
Battery Type Button, Lithium Activation and Four-Stage Charging
A single button on the charger selects the auxiliary battery type: SLD/AGM, GEL, FLD, lithium (LI) or user mode. Lithium can be set with battery activation enabled or disabled. Charging runs through four stages: bulk, boost, float and equalization, with a default boost duration of 2 hours (boost duration and float do not apply to lithium batteries).
Battery Temperature Sensor and IGN Signal Wire Included
The Renogy 12V 40A DC-DC Battery Charger comes with a 2 m (6.6 ft) battery temperature sensor and a 3 m (9.8 ft) IGN signal wire. The temperature sensor is for lead-acid batteries only; Renogy says not to use it on a LiFePO4 battery that has its own battery management system.
Compact Surface-Mount Design at 9.31 x 6.00 x 2.30 in
The charger measures 9.31 x 6.00 x 2.30 in (236.5 x 152.5 x 58.4 mm) and uses natural cooling. Mount it on a wall or flat on the floor, leaving 5.91 in (150 mm) of clearance on each side. Recommended cable sizes are 8 AWG (8.36 mm²) on the battery side and 6 AWG (13.3 mm²) on the starter battery side.
Key Features
- 40A maximum rated charge current
- 12V to 12V buck-boost conversion, 9V-16V input and output
- Up to 94% charging efficiency
- 600W maximum input power at 40A
- Works with traditional and smart alternators (IGN wire for smart alternators)
- Alternator running detection protects the starter battery
- AGM/SLD, gel, flooded, lithium iron phosphate and user battery modes
- Lithium activation can be enabled or disabled
- Four-stage charging: bulk, boost, float, equalization
- Reverse contact, overvoltage, over-discharge, overtemperature and short-circuit protections
- Less than 15mA no-load current consumption
- RS485 communication port
- Natural cooling, surface mounting
- Up to 4.4 lbs (2 kg), 9.31 x 6.00 x 2.30 in
Specifications – Renogy 12V 40A DC-DC Battery Charger
| Specification |
Details |
| Brand |
Renogy |
| Model |
RBC40D1U |
| Product Type |
DC-DC Battery Charger |
| System Voltage |
12V to 12V |
| Converting Method |
Buck-boost |
| Input Voltage Range |
9V-16V |
| Output Voltage Range |
9V-16V |
| Maximum Rated Charge Current |
40A |
| Maximum Input Power |
600W @ 40A |
| Output Power |
584W |
| Charging Efficiency |
Up to 94% |
| Alternator Input Voltage |
Traditional alternator: 13.2V-16V; smart alternator: 12V-16V |
| Auxiliary Battery Types |
SLD/AGM, gel, flooded, lithium iron phosphate (LI), user mode |
| Charging Stages |
Bulk, boost, float, equalization |
| No-Load Current |
Less than 15mA |
| Communication Port |
RS485 |
| Protections |
Auxiliary battery: overvoltage, over-discharge shutdown, overtemperature, short circuit. Starter battery: reverse contact, short circuit |
| Recommended Cable Size |
8 AWG (8.36 mm²) battery side; 6 AWG (13.3 mm²) starter battery side |
| Installation |
Surface mounting, natural cooling |
| Operating Humidity |
0% to 95% RH, no condensation |
| Maximum Operating Altitude |
3000 m |
| Certifications |
CE, RoHS, FCC |
| Dimensions |
9.31 x 6.00 x 2.30 in (236.5 x 152.5 x 58.4 mm) |
| Weight |
Up to 4.4 lbs (2 kg) |
What's in the Box
1 x Renogy 12V 40A DC-DC Battery Charger
1 x Battery Temperature Sensor (2 m)
1 x IGN Signal Wire (3 m)