Renogy 3000W 12V Pure Sine Wave Inverter with UPS Transfer Switch
The Renogy 3000W 12V Pure Sine Wave Inverter with UPS Transfer Switch (model RIV1230PU-126) converts 12V battery power into 120V AC and has a built-in 30A transfer switch that passes grid power to your loads when it is connected. It delivers 3000W continuous with a 6000W surge for 2 seconds, has three AC sockets and a hardwire terminal block, connects to a phone over Bluetooth, and weighs 14.8 lbs (6.7 kg). It is a DC-to-AC inverter and does not charge batteries.
Built-In 30A Transfer Switch for Grid and Battery Power
When the Renogy 3000W 12V Inverter with UPS Transfer Switch is wired to a single-phase 120V AC source through its AC input terminals and is powered on, grid power passes through a bypass directly to your loads. The transfer switch is rated 30A and switches between AC mains and battery in 20 ms in either direction. Renogy states the inverter can be used both on-grid and off-grid.
3000W Continuous Output and 6000W Surge
The inverter provides 3000W continuous (25A AC) and a 6000W surge rating for 2 seconds at 120V AC (±3%). Output frequency can be set to 50Hz or 60Hz to match your loads. Maximum inverter efficiency is 92%, and 87% at full load, with total harmonic distortion below 3%.
Three AC Sockets, Hardwire Terminal Block and USB
Plug devices into the three AC sockets (up to 16A each), or use the high-output AC terminal block to feed a sub-panel or additional outlets. A 5V/2.1A USB port charges phones and tablets. The AC input terminals and output terminals have cable clamps, and the wiring should be done by a qualified person following local electrical codes.
Bluetooth and Wired Remote Control
Built-in Bluetooth lets you pair the inverter with Renogy's mobile app to monitor it; keep the phone within 10 ft (3 m) of the inverter. The included wired remote control has a 16.4 ft (5 m) cable and works with the ON/OFF/REM switch on the inverter. LEDs show power, GFCI and fault status.
Protections and Certification
The Renogy 3000W 12V Inverter with UPS Transfer Switch has an integrated GFCI plus overload, overtemperature, overvoltage, short-circuit and undervoltage protection. A neutral-to-ground bonding relay can be enabled or disabled; Renogy states it must be enabled when the battery supplies the loads, because the GFCI is unavailable when it is disabled. The unit is UL certified to 458, CSA C22.2 No. 107.1-01 and FCC Part 15 Class B.
12V Battery Systems Only
The inverter works only with 12V battery banks, with an input range of 11.0V to 15.5V DC and a maximum continuous battery current of 310A. It does not include battery cables: Renogy recommends 2/0 AWG cables with 3/8 in lugs. Operating temperature is -4°F to 113°F (-20°C to 45°C).
Key Features
- 3000W continuous output, 6000W surge (2 seconds)
- Built-in 30A transfer switch, 20 ms transfer time
- Pure sine wave output, THD below 3%
- Maximum inverter efficiency 92%, 87% at full load
- 3 AC sockets (up to 16A each) plus a high-output AC terminal block
- 5V/2.1A USB power port
- Output frequency selectable: 50Hz or 60Hz
- 12V DC input, 11.0V to 15.5V range, M8 terminals
- Built-in Bluetooth for the Renogy mobile app
- Wired remote control with 16.4 ft cable
- Integrated GFCI, overload, overtemperature, overvoltage, short-circuit and undervoltage protection
- UL 458, CSA C22.2 No. 107.1-01 and FCC Part 15 Class B
- Operating temperature -4°F to 113°F (-20°C to 45°C)
- 14.8 lbs (6.7 kg), 19.2 x 10.4 x 3.8 in
Specifications – Renogy 3000W 12V Pure Sine Wave Inverter with UPS Transfer Switch
| Specification |
Details |
| Brand |
Renogy |
| Model |
RIV1230PU-126 |
| Product Type |
12V Pure Sine Wave Inverter with Transfer Switch (DC to AC) |
| Continuous Output Power |
3000W |
| Continuous Output Current |
25A AC |
| Surge Rating |
6000W (2 seconds) |
| Output Waveform |
Pure sine wave |
| Output Voltage |
120V AC (±3%) |
| Output Frequency |
50Hz / 60Hz |
| Total Harmonic Distortion |
Below 3% |
| AC Terminals |
3 AC sockets + 1 AC high-output terminal block |
| USB Power Port |
5V/2.1A |
| Transfer Switch Rating |
30A |
| Transfer Time (AC Mains to Battery / Battery to AC Mains) |
20 ms / 20 ms |
| Rated AC Input Voltage Range |
90V to 140V AC |
| Rated Battery Input Voltage |
12V DC |
| Battery Input Voltage Range |
11.0V to 15.5V DC |
| Maximum Continuous Battery Current |
310A |
| Inverter Efficiency |
92% maximum |
| Full Load Efficiency |
87% |
| Power Consumption |
Below 18W |
| Battery Low Voltage Alarm |
11.0V DC (±0.3V) |
| Battery Low Voltage Shutdown |
10.5V DC (±0.3V) |
| Battery Overvoltage Shutdown |
16.0V DC (±0.3V) |
| DC Terminals |
M8 x 25 mm |
| Connectivity |
Bluetooth (Renogy app) |
| Wired Remote |
16.4 ft (5 m) cable |
| Cooling |
Thermally controlled fans |
| Enclosure Rating |
IP20 |
| Certifications |
UL 458, CSA C22.2 No. 107.1-01, FCC Part 15 Class B |
| Dimensions |
19.2 x 10.4 x 3.8 in (488.8 x 263.4 x 95.3 mm) |
| Weight |
14.8 lbs (6.7 kg) |
| Operating Temperature |
-4°F to 113°F (-20°C to 45°C) |
| Storage Temperature |
-40°F to 158°F (-40°C to 70°C) |
| Humidity |
Max 95%, non-condensing |
What's in the Box
1 x Renogy 3000W 12V Pure Sine Wave Inverter with UPS Transfer Switch
1 x Inverter Remote Control
1 x User Manual