Renogy 400W N-Type Bifacial Solar Panel 4-Pack
The Renogy 400W N-Type Bifacial Solar Panel 4-Pack is a set of four 400W bifacial solar panels (Renogy lists it as 1600W, 4 x 400W) with 108 N-type half-cut cells per panel and an IP68-rated junction box and MC4 connectors. Each panel measures 67.8 x 44.7 x 1.4 in (1,722 x 1,134 x 35 mm), weighs 45.42 lbs (20.6 kg) and has a 1,500VDC maximum system voltage, for cabins, sheds, farms and ground-mounted systems.
Bifacial Design for Up to 30% Extra Energy
The Renogy 400W N-Type Bifacial Solar Panel collects sunlight on its front and reflected light on its rear. Renogy states it can generate up to 30% more energy than standard monofacial panels in reflective, elevated or rear-exposed installations, for example over sand, snow or light-colored surfaces.
108 N-Type Cells With Up to 25% Cell Efficiency
Each 400W panel uses 108 Grade A+ 16BB N-type monocrystalline cells (9 x 6 x 2) with up to 25% cell efficiency. Module efficiency is 21.5%. Renogy states that N-type cells perform well in heat and low light and degrade more slowly over time.
Half-Cut Cell Design for Partial Shading
The half-cut cell parallel design divides each panel into two independent power zones. One side keeps generating power when the other side is shaded.
1,500VDC System Voltage and IP68 Protection
Each panel has a 1,500VDC maximum system voltage and a 25A maximum series fuse rating. The junction box (3 diodes) and the MC4 connectors (1,500VDC, 40A) are both rated IP68, and the panel operates from -40°F to 185°F (-40°C to 85°C).
Fewer Panels for Higher-Output Systems
Renogy designed the 400W panel for higher-output off-grid systems that need more power with fewer panels, with pre-drilled mounting holes for faster installation.
Available Option
This listing is the 4-Pack, which Renogy labels 1600W (4 x 400W). The specifications below are per panel.
Key Features
- 4 x 400W bifacial panels (Renogy option 1600W, 4 x 400W)
- Bifacial design: up to 30% extra energy depending on installation conditions
- 108 N-type monocrystalline cells (9 x 6 x 2), up to 25% cell efficiency
- Module efficiency 21.5%
- Half-cut cell parallel design for partial shading
- 1,500VDC maximum system voltage, 25A maximum series fuse rating
- IP68 junction box with 3 diodes
- IP68 MC4 connectors rated 1,500VDC and 40A
- 12 AWG output cables, 66.93 in (1,700 mm)
- 67.8 x 44.7 x 1.4 in (1,722 x 1,134 x 35 mm) per panel
- 45.42 lbs (20.6 kg) per panel
- Tempered glass front (0.13 in / 3.2 mm) and anodized aluminum alloy frame
- Operating temperature -40°F to 185°F (-40°C to 85°C)
- Temperature coefficient of Pmax -0.32%/°C
Specifications – Renogy 400W N-Type Bifacial Solar Panel 4-Pack
| Specification |
Details |
| Brand |
Renogy |
| Model |
400W N-Type Bifacial Solar Panel (RSP400DCT) |
| Product Type |
Bifacial Rigid Solar Panel |
| Pack |
4-Pack (4 x 400W, listed by Renogy as 1600W) |
| Rated Power (per panel) |
400W |
| Solar Cell Type |
Mono N-Type (16BB) |
| Number of Cells |
108 (9 x 6 x 2) |
| Module Efficiency |
21.5% |
| Optimum Operating Voltage (Vmp) |
34.0V |
| Optimum Operating Current (Imp) |
11.76A |
| Open-Circuit Voltage (Voc) |
39.42V |
| Short-Circuit Current (Isc) |
13.06A |
| Maximum System Voltage |
1,500VDC |
| Maximum Series Fuse Rating |
25A |
| Dimensions (per panel) |
67.8 x 44.7 x 1.4 in (1,722 x 1,134 x 35 mm) |
| Panel Weight (per panel) |
45.42 lbs (20.6 kg) |
| Front Film |
Tempered glass, 0.13 in (3.2 mm) |
| Frame |
Anodized aluminum alloy |
| Operating Temperature Range |
-40°F to 185°F (-40°C to 85°C) |
| Nominal Operating Cell Temperature |
45 ± 2°C |
| Temperature Coefficient of Pmax |
-0.32%/°C |
| Temperature Coefficient of Voc |
-0.26%/°C |
| Temperature Coefficient of Isc |
0.046%/°C |
| MC4 Connectors |
1,500VDC, 40A, IP68, -40°F to 185°F (-40°C to 85°C) |
| Junction Box |
IP68, 3 diodes |
| Output Cables |
12 AWG, 66.93 in (1,700 mm) |
| Certifications |
CE, RCM, TSCA, CA65 |
What's in the Box
4 x Renogy 400W N-Type Bifacial Solar Panel