Dabbsson DBS2300 Plus Portable Power Station

The Dabbsson DBS2300 Plus Portable Power Station is a 2330Wh LiFePO4 battery generator for home backup, RVs and off-grid use. It delivers 2200W of pure sine wave AC power (4400W surge) from four outlets, accepts up to 800W of solar input, and expands to 8330Wh with two Dabbsson DBS3000B batteries, or to 4000W and 16,660Wh when two units run in parallel.

Dabbsson DBS2300 Plus vs. DBS2300: 800W Solar and 16,660Wh Expansion

Both models store 2330Wh and deliver 2200W of AC output. Dabbsson lists 800W of solar input (12-60V, 25A max) for the DBS2300 Plus, versus 600W (12-60V, 12A max) for the DBS2300. Maximum expansion is 16,660Wh for the DBS2300 Plus, using two units in parallel with four DBS3000B batteries, versus 8330Wh for the DBS2300 with two DBS3000B batteries.

2330Wh LiFePO4 Battery Rated for 4000 Cycles

The Dabbsson DBS2300 Plus stores 2330Wh (44.8V, 52Ah) in LiFePO4 cells rated for 4000 cycles before dropping to 80% of their original capacity. The battery management system covers over-voltage, over-current, overload, short circuit, high and low temperature, low voltage and battery failure.

2200W Pure Sine Wave Output With 3000W P-Boost

Four AC outlets share 2200W of continuous pure sine wave power at 100-120V, with a 4400W surge rating. P-Boost mode, turned on in the Dabbsson app, lets the unit run appliances rated up to 3000W while holding actual output at 2200W. Dabbsson recommends P-Boost mainly for heating appliances, and it is not available while charging or in parallel mode.

Expand to 8330Wh, or 16,660Wh in Parallel

The Dabbsson DBS2300 Plus connects to up to two Dabbsson DBS3000B Expandable Batteries: one brings total capacity to 5330Wh, two bring it to 8330Wh. With Dabbsson's parallel junction box and cables (sold separately), two DBS2300 Plus units combine for 4000W of output and 4660Wh, or 16,660Wh with two DBS3000B batteries on each unit.

1800W AC Charging, 800W Solar and 12V/24V Car Input

At the full 1800W AC input, the DBS2300 Plus recharges in about 2 hours; the AC Charge Speed Switch and the app let you set the rate from 200W to 1800W (600W by default) to match the circuit you plug into. The XT60 solar port takes 12-60V at up to 25A and 800W, which Dabbsson rates at about 4 hours for a full charge, depending on conditions. A car charging cable for 12V or 24V sockets (8A by default) is included.

15ms EPS Switchover and App Control

Plugged into a wall outlet, the Dabbsson DBS2300 Plus passes grid power to connected devices and switches to battery power within 15ms if the grid fails. Dabbsson specifies this as a basic UPS function, not intended for equipment that requires a 0ms transfer such as data servers and workstations. The Dabbsson app connects over 2.4GHz Wi-Fi or Bluetooth to monitor input and output, set charging speed, enable P-Boost, adjust standby times and update firmware.

Key Features

• 2330Wh LiFePO4 battery rated for 4000 cycles to 80% capacity
• 2200W pure sine wave AC output, 4400W surge, 3000W P-Boost for heating appliances
• 4 AC outlets, 3 USB-C (1 x 100W, 2 x 30W), 3 USB-A (1 x 18W fast charge, 2 x 5V 2.4A)
• 12V 30A Anderson output (378W max), 12V car outlet (126W) and 2 DC5521 ports
• Expands to 8330Wh with two Dabbsson DBS3000B batteries
• Parallel mode: 2 units reach 4000W and up to 16,660Wh with four DBS3000B
• 1800W AC charging, about 2 hours for a full charge, adjustable from 200W to 1800W
• 800W solar input (12-60V, 25A max) through an XT60 port
• 15ms EPS switchover for outage protection
• Wi-Fi and Bluetooth control in the Dabbsson app
• Built-in 2W LED light
• 58.15 lbs (26.38 kg)

Specifications – Dabbsson DBS2300 Plus Portable Power Station

What's in the Box

1 x Dabbsson DBS2300 Plus Portable Power Station

1 x AC charging cable

1 x Car charging cable

1 x Solar charging cable

1 x User manual